Centreon Asterisk
De SLM - MediaWiki
Sommaire
Serveur VoIP Asterisk
Conditions préalables
Centreon Plugin
Installez ce plugin sur chaque poller nécessaire :
yum install centreon-plugin-Applications-Voip-Asterisk
Configuration du serveur Asterisk
Après vous être connecté avec le compte root à votre serveur Asterisk, vous devez effectuer les configurations suivantes.
Mode SNMP
- Installez le démon snmpd .
yum -y install net-snmp net-snmp-utils
- Demarrer le service
systemctl enable snmpd service snmpd start
- Modifiez le fichier nano /etc/asterisk/vitalpbx/modules__20-noload.conf en commentant la ligne contenant res_snmp.so:
nano /etc/asterisk/vitalpbx/modules__20-noload.conf
Exemple:
[modules] autoload=yes ... ;noload => res_snmp.so ...
- Créez le fichier /etc/asterisk/res_snmp.conf pour ajouter les paramètres suivants :
nano /etc/asterisk/res_snmp.conf
[general] subagent = yes enabled = yes
- Ajouter des paramètres à la fin de /etc/snmp/snmpd.conf :
echo -e " ############################################################################### # Custom SLM ############################################################################## # Acces to Asterisk snmp # Asterisk user createUser asteriskUser SHA "password" AES rwuser asteriskUser priv # Enable AgentX support master agentx agentXSocket /var/agentx/master # Set permissions on AgentX socket and containing # directory such that process in group 'asterisk' # will be able to connect\nagentXPerms 0660 0550 nobody asterisk" >> /etc/snmp/snmpd.conf
- Téléchargez les 2 fichiers suivants et placez-les dans /usr/share/snmp/mibs:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions
echo -e "ASTERISK-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, Integer32, Counter32, TimeTicks,
Unsigned32, Gauge32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, TruthValue
FROM SNMPv2-TC
digium
FROM DIGIUM-MIB;
asterisk MODULE-IDENTITY
LAST-UPDATED "200806202025Z"
ORGANIZATION "Digium, Inc."
CONTACT-INFO
"Mark A. Spencer
Postal: Digium, Inc.
445 Jan Davis Drive
Huntsville, AL 35806
USA
Tel: +1 256 428 6000
Email: markster@digium.com
Thorsten Lockert
Postal: Voop AS
Boehmergaten 42
NO-5057 Bergen
Norway
Tel: +47 5598 7200
Email: tholo@voop.no"
DESCRIPTION
"Asterisk is an Open Source PBX. This MIB defined
objects for managing Asterisk instances."
REVISION "200806202025Z"
DESCRIPTION
"smilint police --
Add missing imports; fix initial capitalization
of enumeration elements; add missing range
restrictions for Integer32 indices, correct
spelling of astChanCidANI in its definition.
Addresses bug 12905. - jeffg@opennms.org"
REVISION "200708211450Z"
DESCRIPTION
"Add total and current call counter statistics."
REVISION "200603061840Z"
DESCRIPTION
"Change audio codec identification from 3kAudio to
Audio3k to conform better with specification.
Expand on contact information."
REVISION "200602041900Z"
DESCRIPTION
"Initial published revision."
::= { digium 1 }
asteriskVersion OBJECT IDENTIFIER ::= { asterisk 1 }
asteriskConfiguration OBJECT IDENTIFIER ::= { asterisk 2 }
asteriskModules OBJECT IDENTIFIER ::= { asterisk 3 }
asteriskIndications OBJECT IDENTIFIER ::= { asterisk 4 }
asteriskChannels OBJECT IDENTIFIER ::= { asterisk 5 }
-- asteriskVersion
astVersionString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Text version string of the version of Asterisk that
the SNMP Agent was compiled to run against."
::= { asteriskVersion 1 }
astVersionTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SubVersion revision of the version of Asterisk that
the SNMP Agent was compiled to run against -- this is
typically 0 for release-versions of Asterisk."
::= { asteriskVersion 2 }
-- asteriskConfiguration
astConfigUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time ticks since Asterisk was started."
::= { asteriskConfiguration 1 }
astConfigReloadTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time ticks since Asterisk was last reloaded."
::= { asteriskConfiguration 2 }
astConfigPid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process id of the running Asterisk process."
::= { asteriskConfiguration 3 }
astConfigSocket OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The control socket for giving Asterisk commands."
::= { asteriskConfiguration 4 }
astConfigCallsActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls currently active on the Asterisk PBX."
::= { asteriskConfiguration 5 }
astConfigCallsProcessed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of calls processed through the Asterisk PBX since last
restart."
::= { asteriskConfiguration 6 }
-- asteriskModules
astNumModules OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of modules currently loaded into Asterisk."
::= { asteriskModules 1 }
-- asteriskIndications
astNumIndications OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of indications currently defined in Asterisk."
::= { asteriskIndications 1 }
astCurrentIndication OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Default indication zone to use."
::= { asteriskIndications 2 }
astIndicationsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AstIndicationsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table with all the indication zones currently know to
the running Asterisk instance."
::= { asteriskIndications 3 }
astIndicationsEntry OBJECT-TYPE
SYNTAX AstIndicationsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single indication zone."
INDEX { astIndIndex }
::= { astIndicationsTable 1 }
AstIndicationsEntry ::= SEQUENCE {
astIndIndex Integer32,
astIndCountry DisplayString,
astIndAlias DisplayString,
astIndDescription DisplayString
}
astIndIndex OBJECT-TYPE
SYNTAX Integer32 (1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Numerical index into the table of indication zones."
::= { astIndicationsEntry 1 }
astIndCountry OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Country for which the indication zone is valid,
typically this is the ISO 2-letter code of the country."
::= { astIndicationsEntry 2 }
astIndAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { astIndicationsEntry 3 }
astIndDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the indication zone, usually the full
name of the country it is valid for."
::= { astIndicationsEntry 4 }
-- asteriskChannels
astNumChannels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of active channels."
::= { asteriskChannels 1 }
astChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AstChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table with details of the currently active channels
in the Asterisk instance."
::= { asteriskChannels 2 }
astChanEntry OBJECT-TYPE
SYNTAX AstChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Details of a single channel."
INDEX { astChanIndex }
::= { astChanTable 1 }
AstChanEntry ::= SEQUENCE {
astChanIndex Integer32,
astChanName DisplayString,
astChanLanguage DisplayString,
astChanType DisplayString,
astChanMusicClass DisplayString,
astChanBridge DisplayString,
astChanMasq DisplayString,
astChanMasqr DisplayString,
astChanWhenHangup TimeTicks,
astChanApp DisplayString,
astChanData DisplayString,
astChanContext DisplayString,
astChanMacroContext DisplayString,
astChanMacroExten DisplayString,
astChanMacroPri Integer32,
astChanExten DisplayString,
astChanPri Integer32,
astChanAccountCode DisplayString,
astChanForwardTo DisplayString,
astChanUniqueId DisplayString,
astChanCallGroup Unsigned32,
astChanPickupGroup Unsigned32,
astChanState INTEGER,
astChanMuted TruthValue,
astChanRings Integer32,
astChanCidDNID DisplayString,
astChanCidNum DisplayString,
astChanCidName DisplayString,
astChanCidANI DisplayString,
astChanCidRDNIS DisplayString,
astChanCidPresentation DisplayString,
astChanCidANI2 Integer32,
astChanCidTON Integer32,
astChanCidTNS Integer32,
astChanAMAFlags INTEGER,
astChanADSI INTEGER,
astChanToneZone DisplayString,
astChanHangupCause INTEGER,
astChanVariables DisplayString,
astChanFlags BITS,
astChanTransferCap INTEGER
}
astChanIndex OBJECT-TYPE
SYNTAX Integer32 (1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index into the channel table."
::= { astChanEntry 1 }
astChanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the current channel."
::= { astChanEntry 2 }
astChanLanguage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Which language the current channel is configured to
use -- used mainly for prompts."
::= { astChanEntry 3 }
astChanType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Underlying technology for the current channel."
::= { astChanEntry 4 }
astChanMusicClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Music class to be used for Music on Hold for this
channel."
::= { astChanEntry 5 }
astChanBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Which channel this channel is currently bridged (in a
conversation) with."
::= { astChanEntry 6 }
astChanMasq OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel masquerading for us."
::= { astChanEntry 7 }
astChanMasqr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel we are masquerading for."
::= { astChanEntry 8 }
astChanWhenHangup OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How long until this channel will be hung up."
::= { astChanEntry 9 }
astChanApp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current application for the channel."
::= { astChanEntry 10 }
astChanData OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Arguments passed to the current application."
::= { astChanEntry 11 }
astChanContext OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current extension context."
::= { astChanEntry 12 }
astChanMacroContext OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current macro context."
::= { astChanEntry 13 }
astChanMacroExten OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current macro extension."
::= { astChanEntry 14 }
astChanMacroPri OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current macro priority."
::= { astChanEntry 15 }
astChanExten OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current extension."
::= { astChanEntry 16 }
astChanPri OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current priority."
::= { astChanEntry 17 }
astChanAccountCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Account Code for billing."
::= { astChanEntry 18 }
astChanForwardTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Where to forward to if asked to dial on this
interface."
::= { astChanEntry 19 }
astChanUniqueId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique Channel Identifier."
::= { astChanEntry 20 }
astChanCallGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Call Group."
::= { astChanEntry 21 }
astChanPickupGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pickup Group."
::= { astChanEntry 22 }
astChanState OBJECT-TYPE
SYNTAX INTEGER {
stateDown(0),
stateReserved(1),
stateOffHook(2),
stateDialing(3),
stateRing(4),
stateRinging(5),
stateUp(6),
stateBusy(7),
stateDialingOffHook(8),
statePreRing(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel state."
::= { astChanEntry 23 }
astChanMuted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmission of voice data has been muted."
::= { astChanEntry 24 }
astChanRings OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of rings so far."
::= { astChanEntry 25 }
astChanCidDNID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dialled Number ID."
::= { astChanEntry 26 }
astChanCidNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Caller Number."
::= { astChanEntry 27 }
astChanCidName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Caller Name."
::= { astChanEntry 28 }
astChanCidANI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ANI"
::= { astChanEntry 29 }
astChanCidRDNIS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Redirected Dialled Number Service."
::= { astChanEntry 30 }
astChanCidPresentation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number Presentation/Screening."
::= { astChanEntry 31 }
astChanCidANI2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ANI 2 (info digit)."
::= { astChanEntry 32 }
astChanCidTON OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of Number."
::= { astChanEntry 33 }
astChanCidTNS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transit Network Select."
::= { astChanEntry 34 }
astChanAMAFlags OBJECT-TYPE
SYNTAX INTEGER {
default(0),
omit(1),
billing(2),
documentation(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AMA Flags."
::= { astChanEntry 35 }
astChanADSI OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
available(1),
unavailable(2),
offHookOnly(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not ADSI is detected on CPE."
::= { astChanEntry 36 }
astChanToneZone OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indication zone to use for channel."
::= { astChanEntry 37 }
astChanHangupCause OBJECT-TYPE
SYNTAX INTEGER {
notDefined(0),
unregistered(3),
normal(16),
busy(17),
noAnswer(19),
congestion(34),
failure(38),
noSuchDriver(66)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Why is the channel hung up."
::= { astChanEntry 38 }
astChanVariables OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel Variables defined for this channel."
::= { astChanEntry 39 }
astChanFlags OBJECT-TYPE
SYNTAX BITS {
wantsJitter(0),
deferDTMF(1),
writeInterrupt(2),
blocking(3),
zombie(4),
exception(5),
musicOnHold(6),
spying(7),
nativeBridge(8),
autoIncrementingLoop(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flags set on this channel."
::= { astChanEntry 40 }
astChanTransferCap OBJECT-TYPE
SYNTAX INTEGER {
speech(0),
digital(8),
restrictedDigital(9),
audio3k(16),
digitalWithTones(17),
video(24)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transfer Capabilities for this channel."
::= { astChanEntry 41 }
astNumChanTypes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of channel types (technologies) supported."
::= { asteriskChannels 3 }
astChanTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AstChanTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table with details of the supported channel types."
::= { asteriskChannels 4 }
astChanTypeEntry OBJECT-TYPE
SYNTAX AstChanTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a technology we support, including
how many channels are currently using this technology."
INDEX { astChanTypeIndex }
::= { astChanTypeTable 1 }
AstChanTypeEntry ::= SEQUENCE {
astChanTypeIndex Integer32,
astChanTypeName DisplayString,
astChanTypeDesc DisplayString,
astChanTypeDeviceState Integer32,
astChanTypeIndications Integer32,
astChanTypeTransfer Integer32,
astChanTypeChannels Gauge32
}
astChanTypeIndex OBJECT-TYPE
SYNTAX Integer32 (1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index into the table of channel types."
::= { astChanTypeEntry 1 }
astChanTypeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique name of the technology we are describing."
::= { astChanTypeEntry 2 }
astChanTypeDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the channel type (technology)."
::= { astChanTypeEntry 3 }
astChanTypeDeviceState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the current technology can hold device states."
::= { astChanTypeEntry 4 }
astChanTypeIndications OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the current technology supports progress indication."
::= { astChanTypeEntry 5 }
astChanTypeTransfer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the current technology supports transfers, where
Asterisk can get out from inbetween two bridged channels."
::= { astChanTypeEntry 6 }
astChanTypeChannels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active channels using the current technology."
::= { astChanTypeEntry 7 }
astChanScalars OBJECT IDENTIFIER ::= { asteriskChannels 5 }
astNumChanBridge OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of channels currently in a bridged state."
::= { astChanScalars 1 }
END
" >> /usr/share/snmp/mibs/Asterisk+MIB+Definitions.txt
https://wiki.asterisk.org/wiki/display/AST/Digium+MIB+Definitions
echo -e "DIGIUM-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, MODULE-IDENTITY
FROM SNMPv2-SMI;
digium MODULE-IDENTITY
LAST-UPDATED "200806202000Z"
ORGANIZATION "Digium, Inc."
CONTACT-INFO
"Mark Spencer
Email: markster@digium.com"
DESCRIPTION
"The Digium private-enterprise MIB"
REVISION "200806202000Z"
DESCRIPTION
"Corrected imports and missing revision for last update.
Addresses bug 12905. - jeffg@opennms.org"
REVISION "200602041900Z"
DESCRIPTION
"Initial revision."
::= { enterprises 22736 }
END" >> /usr/share/snmp/mibs/Digium+MIB+Definitions.txt
Redémarrez snmpd et le serveur asterisk :
service snmpd restart service asterisk restart
Voici un exemple de commande pour vérifier la fonctionnalité snmp :
snmpwalk -v 3 -u asteriskUser -l authPriv -a SHA -A "password" -x AES -X "password" <xivo serveur IP> .1.3.6.1.4.1.22736
Copie Mode à distance Commun Pour tout accès à distance, vous devez créer un utilisateur Asterisk :
vi /etc/aserisk/manager.conf
Copie exemple d'utilisateur :
[xivo_centreon_user] secret = centreon deny=0.0.0.0/0.0.0.0 permit=127.0.0.1/255.255.255.0 read = system,call,log,verbose,command,agent,user,dtmf write = system,call,log,verbose,command,agent,user,dtmf
Copie AMI Dans l'utilisateur nouvellement créé, ajoutez une ligne d' autorisation pour permettre au serveur centreon de se connecter à l'AMI :
vi /etc/aserisk/manager.conf
Copie Exemple:
permit=10.30.2.32/255.255.255.0
Copie SSH Créez un utilisateur système, centreon par exemple :
useradd centreon passwd centreon
Echangez les clés ssh du serveur centreon vers le serveur asterisk (utilisateur centreon dans notre exemple) :
ssh-copy-id centreon@
Poussez le script /usr/lib/nagios/plugins/apps/voip/asterisk/remote/remote-script/asterisk_sendcommand.pm vers /home/centreon/bin:
scp /usr/lib/nagios/plugins/apps/voip/asterisk/remote/remote-script/asterisk_sendcommand.pm /home/centreon/bin/.
Push depuis le serveur centreon /usr/lib/nagios/plugins/apps/voip/asterisk/remote/remote-script/asterisk_sendcommand.confou créez-le /home/centreon/bin/asterisk_centreon.confdirectement sur le serveur asterisk
Copiez le nom d'utilisateur et le secret de l'utilisateur centreon contenus dans /etc/asterisk/manager.confdans /home/centreon/bin/asterisk_centreon.conf:
vi /home/centreon/bin/asterisk_centreon.conf
ajoutez la ligne :
xivo_centreon_user centreon
Copie Attention : ce fichier ne doit contenir qu'une seule ligne
Attention : les fichiers /home/centreon/bin/asterisk_centreon.confet /home/centreon/bin/asterisk_centreon.confdoivent être exécutables et lisibles par l' utilisateur centreon
Mode SSH
- Serveur Tiscom Voice
Créer utilisateur centreon
useradd centreon -g root -s /bin/sh
Lui définir un mot de passe
passwd centreon
- Serveur Centreon
se connecter en user centreon
su - centreon
Envoyer sa clé ssh au serveur tiscom voice
ssh-copy-id -i ~/.ssh/id_rsa.pub 10.10.10.232 /bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/var/spool/centreon/.ssh/id_rsa.pub" The authenticity of host '10.10.10.232 (10.10.10.232)' can't be established. ECDSA key fingerprint is SHA256:9YM1mTisdUt49W0r1yVeAa3srrMHU/gnoMfw4B2X4Pc. ECDSA key fingerprint is MD5:41:5e:7a:5d:d2:91:5c:55:ee:58:f8:dd:01:a2:5e:09. Are you sure you want to continue connecting (yes/no)? yes /bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed /bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys centreon@10.10.10.232's password: Entrer le mot de passe précédemment créer Number of key(s) added: 1 Now try logging into the machine, with: "ssh '10.10.10.232'" and check to make sure that only the key(s) you wanted were added.
- Sur serveur tiscom voice
Désactiver le mot de passe de l'user centreon
passwd -l centreon
- Sur serveur Centreon
Tester la connexion ssh
ssh@10.10.10.232
Si aucun mot de passe n'est demandé, et que vous tombé sur la console ssh Tiscom voice, c'est gagné.
