Centreon Asterisk : Différence entre versions

De SLM - MediaWiki
 
Ligne 838 : Ligne 838 :
  
 
https://wiki.asterisk.org/wiki/display/AST/Digium+MIB+Definitions
 
https://wiki.asterisk.org/wiki/display/AST/Digium+MIB+Definitions
−
  <nowiki>echo -e "DIGIUM-MIB DEFINITIONS ::= BEGIN
+
 +
nano /usr/share/snmp/mibs/Digium+MIB+Definitions.txt
 +
  <nowiki>DIGIUM-MIB DEFINITIONS ::= BEGIN
  
 
IMPORTS
 
IMPORTS
Ligne 861 : Ligne 863 :
 
::= { enterprises 22736 }
 
::= { enterprises 22736 }
  
−
END" >> /usr/share/snmp/mibs/Digium+MIB+Definitions.txt </nowiki>
+
END</nowiki>
  
 
Redémarrez snmpd et le serveur asterisk :
 
Redémarrez snmpd et le serveur asterisk :

Version actuelle datée du 19 septembre 2021 à 13:10

Retour

Serveur VoIP Asterisk

Conditions préalables

Centreon Plugin

Installez ce plugin sur chaque poller nécessaire : 

yum install centreon-plugin-Applications-Voip-Asterisk

Configuration du serveur Asterisk

Après vous être connecté avec le compte root à votre serveur Asterisk, vous devez effectuer les configurations suivantes.

Mode SNMP
  • Installez le démon snmpd .
yum -y install net-snmp net-snmp-utils
  • Demarrer le service
systemctl enable snmpd
service snmpd start
  • Modifiez le fichier nano /etc/asterisk/vitalpbx/modules__20-noload.conf en commentant la ligne contenant res_snmp.so:
nano /etc/asterisk/vitalpbx/modules__20-noload.conf

Exemple: 

[modules] autoload=yes
... 
;noload => res_snmp.so
...
  • Créez le fichier /etc/asterisk/res_snmp.conf pour ajouter les paramètres suivants :
nano /etc/asterisk/res_snmp.conf

[general]
subagent = yes
enabled = yes
  • Ajouter des paramètres à la fin de /etc/snmp/snmpd.conf :
echo -e "

###############################################################################
# Custom SLM
##############################################################################
# Acces to Asterisk snmp
# Asterisk user
createUser asteriskUser SHA "password" AES
rwuser asteriskUser priv
# Enable AgentX support
master agentx
agentXSocket /var/agentx/master
# Set permissions on AgentX socket and containing
# directory such that process in group 'asterisk'
# will be able to connect\nagentXPerms  0660 0550 nobody asterisk" >> /etc/snmp/snmpd.conf


  • Téléchargez les 2 fichiers suivants et placez-les dans /usr/share/snmp/mibs:

https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions 

nano /usr/share/snmp/mibs/Asterisk+MIB+Definitions.txt

ASTERISK-MIB DEFINITIONS ::= BEGIN

IMPORTS
	OBJECT-TYPE, MODULE-IDENTITY, Integer32, Counter32, TimeTicks,
	Unsigned32, Gauge32
		FROM SNMPv2-SMI

	TEXTUAL-CONVENTION, DisplayString, TruthValue
		FROM SNMPv2-TC

	digium
		FROM DIGIUM-MIB;

asterisk MODULE-IDENTITY
	LAST-UPDATED	"200806202025Z"
	ORGANIZATION	"Digium, Inc."
	CONTACT-INFO
		"Mark A. Spencer
		Postal: Digium, Inc.
		        445 Jan Davis Drive
		        Huntsville, AL 35806
		        USA
		   Tel: +1 256 428 6000
		 Email: markster@digium.com

		Thorsten Lockert
		Postal: Voop AS
		        Boehmergaten 42
			NO-5057 Bergen
			Norway
		   Tel: +47 5598 7200
		 Email: tholo@voop.no"
	DESCRIPTION
		"Asterisk is an Open Source PBX.  This MIB defined
		objects for managing Asterisk instances."
	REVISION	"200806202025Z"
	DESCRIPTION
		"smilint police --
		 Add missing imports; fix initial capitalization
		 of enumeration elements; add missing range
		 restrictions for Integer32 indices, correct
		 spelling of astChanCidANI in its definition.
		 Addresses bug 12905. - jeffg@opennms.org"
	REVISION	"200708211450Z"
	DESCRIPTION
		"Add total and current call counter statistics."
	REVISION	"200603061840Z"
	DESCRIPTION
		"Change audio codec identification from 3kAudio to
		Audio3k to conform better with specification.

		Expand on contact information."
	REVISION	"200602041900Z"
	DESCRIPTION
		"Initial published revision."
	::= { digium 1 }

asteriskVersion		OBJECT IDENTIFIER ::= { asterisk 1 }
asteriskConfiguration	OBJECT IDENTIFIER ::= { asterisk 2 }
asteriskModules		OBJECT IDENTIFIER ::= { asterisk 3 }
asteriskIndications	OBJECT IDENTIFIER ::= { asterisk 4 }
asteriskChannels	OBJECT IDENTIFIER ::= { asterisk 5 }

-- asteriskVersion

astVersionString OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Text version string of the version of Asterisk that
		the SNMP Agent was compiled to run against."
	::= { asteriskVersion 1 }

astVersionTag OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"SubVersion revision of the version of Asterisk that
		the SNMP Agent was compiled to run against -- this is
		typically 0 for release-versions of Asterisk."
	::= { asteriskVersion 2 }

-- asteriskConfiguration

astConfigUpTime OBJECT-TYPE
	SYNTAX		TimeTicks
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Time ticks since Asterisk was started."
	::= { asteriskConfiguration 1 }

astConfigReloadTime OBJECT-TYPE
	SYNTAX		TimeTicks
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Time ticks since Asterisk was last reloaded."
	::= { asteriskConfiguration 2 }

astConfigPid OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The process id of the running Asterisk process."
	::= { asteriskConfiguration 3 }

astConfigSocket OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The control socket for giving Asterisk commands."
	::= { asteriskConfiguration 4 }

astConfigCallsActive OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of calls currently active on the Asterisk PBX."
	::= { asteriskConfiguration 5 }

astConfigCallsProcessed OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The total number of calls processed through the Asterisk PBX since last
		restart."
	::= { asteriskConfiguration 6 }

-- asteriskModules

astNumModules OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of modules currently loaded into Asterisk."
	::= { asteriskModules 1 }

-- asteriskIndications

astNumIndications OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of indications currently defined in Asterisk."
	::= { asteriskIndications 1 }

astCurrentIndication OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Default indication zone to use."
	::= { asteriskIndications 2 }

astIndicationsTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AstIndicationsEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table with all the indication zones currently know to
		the running Asterisk instance."
	::= { asteriskIndications 3 }

astIndicationsEntry OBJECT-TYPE
	SYNTAX		AstIndicationsEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Information about a single indication zone."
	INDEX		{ astIndIndex }
	::= { astIndicationsTable 1 }

AstIndicationsEntry ::= SEQUENCE {
	astIndIndex		Integer32,
	astIndCountry		DisplayString,
	astIndAlias		DisplayString,
	astIndDescription	DisplayString
}

astIndIndex OBJECT-TYPE
	SYNTAX		Integer32 (1 .. 2147483647)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Numerical index into the table of indication zones."
	::= { astIndicationsEntry 1 }

astIndCountry OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Country for which the indication zone is valid,
		typically this is the ISO 2-letter code of the country."
	::= { astIndicationsEntry 2 }

astIndAlias OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		""
	::= { astIndicationsEntry 3 }

astIndDescription OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Description of the indication zone, usually the full
		name of the country it is valid for."
	::= { astIndicationsEntry 4 }

-- asteriskChannels

astNumChannels OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current number of active channels."
	::= { asteriskChannels 1 }

astChanTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AstChanEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table with details of the currently active channels
		in the Asterisk instance."
	::= { asteriskChannels 2 }

astChanEntry OBJECT-TYPE
	SYNTAX		AstChanEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Details of a single channel."
	INDEX		{ astChanIndex }
	::= { astChanTable 1 }

AstChanEntry ::= SEQUENCE {
	astChanIndex		Integer32,
	astChanName		DisplayString,
	astChanLanguage		DisplayString,
	astChanType		DisplayString,
	astChanMusicClass	DisplayString,
	astChanBridge		DisplayString,
	astChanMasq		DisplayString,
	astChanMasqr		DisplayString,
	astChanWhenHangup	TimeTicks,
	astChanApp		DisplayString,
	astChanData		DisplayString,
	astChanContext		DisplayString,
	astChanMacroContext	DisplayString,
	astChanMacroExten	DisplayString,
	astChanMacroPri		Integer32,
	astChanExten		DisplayString,
	astChanPri		Integer32,
	astChanAccountCode	DisplayString,
	astChanForwardTo	DisplayString,
	astChanUniqueId		DisplayString,
	astChanCallGroup	Unsigned32,
	astChanPickupGroup	Unsigned32,
	astChanState		INTEGER,
	astChanMuted		TruthValue,
	astChanRings		Integer32,
	astChanCidDNID		DisplayString,
	astChanCidNum		DisplayString,
	astChanCidName		DisplayString,
	astChanCidANI		DisplayString,
	astChanCidRDNIS		DisplayString,
	astChanCidPresentation	DisplayString,
	astChanCidANI2		Integer32,
	astChanCidTON		Integer32,
	astChanCidTNS		Integer32,
	astChanAMAFlags		INTEGER,
	astChanADSI		INTEGER,
	astChanToneZone		DisplayString,
	astChanHangupCause	INTEGER,
	astChanVariables	DisplayString,
	astChanFlags		BITS,
	astChanTransferCap	INTEGER
}

astChanIndex OBJECT-TYPE
	SYNTAX		Integer32 (1 .. 2147483647)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Index into the channel table."
	::= { astChanEntry 1 }

astChanName OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Name of the current channel."
	::= { astChanEntry 2 }

astChanLanguage OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Which language the current channel is configured to
		use -- used mainly for prompts."
	::= { astChanEntry 3 }

astChanType OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Underlying technology for the current channel."
	::= { astChanEntry 4 }

astChanMusicClass OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Music class to be used for Music on Hold for this
		channel."
	::= { astChanEntry 5 }

astChanBridge OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Which channel this channel is currently bridged (in a
		conversation) with."
	::= { astChanEntry 6 }

astChanMasq OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel masquerading for us."
	::= { astChanEntry 7 }

astChanMasqr OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel we are masquerading for."
	::= { astChanEntry 8 }

astChanWhenHangup OBJECT-TYPE
	SYNTAX		TimeTicks
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"How long until this channel will be hung up."
	::= { astChanEntry 9 }

astChanApp OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current application for the channel."
	::= { astChanEntry 10 }

astChanData OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Arguments passed to the current application."
	::= { astChanEntry 11 }

astChanContext OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current extension context."
	::= { astChanEntry 12 }

astChanMacroContext OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current macro context."
	::= { astChanEntry 13 }

astChanMacroExten OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current macro extension."
	::= { astChanEntry 14 }

astChanMacroPri OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current macro priority."
	::= { astChanEntry 15 }

astChanExten OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current extension."
	::= { astChanEntry 16 }

astChanPri OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current priority."
	::= { astChanEntry 17 }

astChanAccountCode OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Account Code for billing."
	::= { astChanEntry 18 }

astChanForwardTo OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Where to forward to if asked to dial on this
		interface."
	::= { astChanEntry 19 }

astChanUniqueId OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Unique Channel Identifier."
	::= { astChanEntry 20 }

astChanCallGroup OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Call Group."
	::= { astChanEntry 21 }

astChanPickupGroup OBJECT-TYPE
	SYNTAX		Unsigned32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Pickup Group."
	::= { astChanEntry 22 }

astChanState OBJECT-TYPE
	SYNTAX		INTEGER {
		stateDown(0),
		stateReserved(1),
		stateOffHook(2),
		stateDialing(3),
		stateRing(4),
		stateRinging(5),
		stateUp(6),
		stateBusy(7),
		stateDialingOffHook(8),
		statePreRing(9)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel state."
	::= { astChanEntry 23 }

astChanMuted OBJECT-TYPE
	SYNTAX		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Transmission of voice data has been muted."
	::= { astChanEntry 24 }

astChanRings OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of rings so far."
	::= { astChanEntry 25 }

astChanCidDNID OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Dialled Number ID."
	::= { astChanEntry 26 }

astChanCidNum OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Caller Number."
	::= { astChanEntry 27 }

astChanCidName OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Caller Name."
	::= { astChanEntry 28 }

astChanCidANI OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"ANI"
	::= { astChanEntry 29 }

astChanCidRDNIS OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Redirected Dialled Number Service."
	::= { astChanEntry 30 }

astChanCidPresentation OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number Presentation/Screening."
	::= { astChanEntry 31 }

astChanCidANI2 OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"ANI 2 (info digit)."
	::= { astChanEntry 32 }

astChanCidTON OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Type of Number."
	::= { astChanEntry 33 }

astChanCidTNS OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Transit Network Select."
	::= { astChanEntry 34 }

astChanAMAFlags OBJECT-TYPE
	SYNTAX		INTEGER {
		default(0),
		omit(1),
		billing(2),
		documentation(3)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"AMA Flags."
	::= { astChanEntry 35 }

astChanADSI OBJECT-TYPE
	SYNTAX		INTEGER {
		unknown(0),
		available(1),
		unavailable(2),
		offHookOnly(3)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Whether or not ADSI is detected on CPE."
	::= { astChanEntry 36 }

astChanToneZone OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Indication zone to use for channel."
	::= { astChanEntry 37 }

astChanHangupCause OBJECT-TYPE
	SYNTAX		INTEGER {
		notDefined(0),
		unregistered(3),
		normal(16),
		busy(17),
		noAnswer(19),
		congestion(34),
		failure(38),
		noSuchDriver(66)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Why is the channel hung up."
	::= { astChanEntry 38 }

astChanVariables OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel Variables defined for this channel."
	::= { astChanEntry 39 }

astChanFlags OBJECT-TYPE
	SYNTAX		BITS {
		wantsJitter(0),
		deferDTMF(1),
		writeInterrupt(2),
		blocking(3),
		zombie(4),
		exception(5),
		musicOnHold(6),
		spying(7),
		nativeBridge(8),
		autoIncrementingLoop(9)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Flags set on this channel."
	::= { astChanEntry 40 }

astChanTransferCap OBJECT-TYPE
	SYNTAX		INTEGER {
		speech(0),
		digital(8),
		restrictedDigital(9),
		audio3k(16),
		digitalWithTones(17),
		video(24)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Transfer Capabilities for this channel."
	::= { astChanEntry 41 }

astNumChanTypes OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of channel types (technologies) supported."
	::= { asteriskChannels 3 }

astChanTypeTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AstChanTypeEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table with details of the supported channel types."
	::= { asteriskChannels 4 }

astChanTypeEntry OBJECT-TYPE
	SYNTAX		AstChanTypeEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Information about a technology we support, including
		how many channels are currently using this technology."
	INDEX		{ astChanTypeIndex }
	::= { astChanTypeTable 1 }

AstChanTypeEntry ::= SEQUENCE {
	astChanTypeIndex	Integer32,
	astChanTypeName		DisplayString,
	astChanTypeDesc		DisplayString,
	astChanTypeDeviceState	Integer32,
	astChanTypeIndications	Integer32,
	astChanTypeTransfer	Integer32,
	astChanTypeChannels	Gauge32
}

astChanTypeIndex OBJECT-TYPE
	SYNTAX		Integer32 (1 .. 2147483647)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Index into the table of channel types."
	::= { astChanTypeEntry 1 }

astChanTypeName OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Unique name of the technology we are describing."
	::= { astChanTypeEntry 2 }

astChanTypeDesc OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Description of the channel type (technology)."
	::= { astChanTypeEntry 3 }

astChanTypeDeviceState OBJECT-TYPE
	SYNTAX		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Whether the current technology can hold device states."
	::= { astChanTypeEntry 4 }

astChanTypeIndications OBJECT-TYPE
	SYNTAX		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Whether the current technology supports progress indication."
	::= { astChanTypeEntry 5 }

astChanTypeTransfer OBJECT-TYPE
	SYNTAX		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Whether the current technology supports transfers, where
		Asterisk can get out from inbetween two bridged channels."
	::= { astChanTypeEntry 6 }

astChanTypeChannels OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of active channels using the current technology."
	::= { astChanTypeEntry 7 }

astChanScalars OBJECT IDENTIFIER ::= { asteriskChannels 5 }

astNumChanBridge OBJECT-TYPE
       SYNTAX          Gauge32
       MAX-ACCESS      read-only
       STATUS          current
       DESCRIPTION
               "Number of channels currently in a bridged state."
       ::= { astChanScalars 1 }

END

https://wiki.asterisk.org/wiki/display/AST/Digium+MIB+Definitions 

nano /usr/share/snmp/mibs/Digium+MIB+Definitions.txt
DIGIUM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	enterprises, MODULE-IDENTITY
		FROM SNMPv2-SMI;

digium MODULE-IDENTITY
	LAST-UPDATED	"200806202000Z"
	ORGANIZATION	"Digium, Inc."
	CONTACT-INFO
		"Mark Spencer
		Email: markster@digium.com"
	DESCRIPTION
		"The Digium private-enterprise MIB"
	REVISION	"200806202000Z"
	DESCRIPTION
		"Corrected imports and missing revision for last update.
		 Addresses bug 12905. - jeffg@opennms.org"
	REVISION	"200602041900Z"
	DESCRIPTION
		"Initial revision."
	::= { enterprises 22736 }

END

Redémarrez snmpd et le serveur asterisk : 

service snmpd restart
service asterisk restart

Voici un exemple de commande pour vérifier la fonctionnalité snmp :

snmpwalk -v 3 -u asteriskUser -l authPriv -a SHA -A "password" -x AES -X "password" <xivo serveur IP> .1.3.6.1.4.1.22736

Copie Mode à distance Commun Pour tout accès à distance, vous devez créer un utilisateur Asterisk :

vi /etc/aserisk/manager.conf

Copie exemple d'utilisateur :

[xivo_centreon_user] secret = centreon deny=0.0.0.0/0.0.0.0 permit=127.0.0.1/255.255.255.0 read = system,call,log,verbose,command,agent,user,dtmf write = system,call,log,verbose,command,agent,user,dtmf

Copie AMI Dans l'utilisateur nouvellement créé, ajoutez une ligne d' autorisation pour permettre au serveur centreon de se connecter à l'AMI :

vi /etc/aserisk/manager.conf

Copie Exemple:

permit=10.30.2.32/255.255.255.0

Copie SSH Créez un utilisateur système, centreon par exemple :

useradd centreon passwd centreon

Echangez les clés ssh du serveur centreon vers le serveur asterisk (utilisateur centreon dans notre exemple) :

ssh-copy-id centreon@

Poussez le script /usr/lib/nagios/plugins/apps/voip/asterisk/remote/remote-script/asterisk_sendcommand.pm vers /home/centreon/bin:

scp /usr/lib/nagios/plugins/apps/voip/asterisk/remote/remote-script/asterisk_sendcommand.pm /home/centreon/bin/.

Push depuis le serveur centreon /usr/lib/nagios/plugins/apps/voip/asterisk/remote/remote-script/asterisk_sendcommand.confou créez-le /home/centreon/bin/asterisk_centreon.confdirectement sur le serveur asterisk

Copiez le nom d'utilisateur et le secret de l'utilisateur centreon contenus dans /etc/asterisk/manager.confdans /home/centreon/bin/asterisk_centreon.conf:

vi /home/centreon/bin/asterisk_centreon.conf

ajoutez la ligne :

xivo_centreon_user centreon

Copie Attention : ce fichier ne doit contenir qu'une seule ligne

Attention : les fichiers /home/centreon/bin/asterisk_centreon.confet /home/centreon/bin/asterisk_centreon.confdoivent être exécutables et lisibles par l' utilisateur centreon

Mode SSH
  • Serveur Tiscom Voice

Créer utilisateur centreon 

useradd centreon -g root -s /bin/sh

Lui définir un mot de passe 

passwd centreon


  • Serveur Centreon

se connecter en user centreon 

su - centreon

Envoyer sa clé ssh au serveur tiscom voice 

ssh-copy-id -i ~/.ssh/id_rsa.pub 10.10.10.232

/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/var/spool/centreon/.ssh/id_rsa.pub"
The authenticity of host '10.10.10.232 (10.10.10.232)' can't be established.
ECDSA key fingerprint is SHA256:9YM1mTisdUt49W0r1yVeAa3srrMHU/gnoMfw4B2X4Pc.
ECDSA key fingerprint is MD5:41:5e:7a:5d:d2:91:5c:55:ee:58:f8:dd:01:a2:5e:09.
Are you sure you want to continue connecting (yes/no)? yes
/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
centreon@10.10.10.232's password:
Entrer le mot de passe précédemment créer

Number of key(s) added: 1

Now try logging into the machine, with:   "ssh '10.10.10.232'"
and check to make sure that only the key(s) you wanted were added.
  • Sur serveur tiscom voice

Désactiver le mot de passe de l'user centreon 

passwd -l centreon
  • Sur serveur Centreon

Tester la connexion ssh 

ssh@10.10.10.232

Si aucun mot de passe n'est demandé, et que vous tombé sur la console ssh Tiscom voice, c'est gagné. Prompt tiscomvoice.png

Récupérée de « https://wiki.slemoal.fr/index.php?title=Centreon_Asterisk&oldid=1038 »